SQS 70-Class Scale Air Racer

Phantom 70

---

No.11077　　 Kit

The biplane that dominated the Reno Air Races, designed in cooperation with the original flying team. Enjoy the breathtaking racing performance of 70-class power!

With repeated victories in the biplane-class, Phantom has dominated all rivals at the famed Reno Air Races. As a biplane, the aggressive form of Phantom has been especially designed for peak air racing performance. The focus on speed and turning control has resulted in a scaled down model that delivers the full-size flying experience. From the start of the 2007 Reno Air Races, the original flying team proudly wears the Kyosho logo as a sign of Kyosho’s sponsorship and the close collaboration in model design. Naturally these graphics are included on the 70-class model as well. The FRP fuselage combines with balsa main and tail wings to realize an optimal lightweight structure. While the wing has a slightly larger leading edge radius than the original plane, it also produces low speed stability and stall characteristics that you wouldn’t expect from a racer. Almost completely pre-built, there aren’t many steps needed for the finishing touches so intermediate to advanced fliers will find themselves airborne in a relatively short period of time. While still regarded as a middle size, there is plenty of power and performance to experience the true excitement of air racing battles.

Detailed curves and lines accurately recreate the form and performance characteristics of the original for a real racing experience.

Wide flanks and lower inverted gull-wing give the model the same characteristic form as the original. Spacious fuselage also has plenty of room for easy linkage setup.

The short wing span and inverted gull-wing produce dynamic performance for air racing.

While maintaining the sharp main wing design, subtle modifications for optimal flying model performance produce excellent low speed and turning stability.

The inverted gull-wing is made from lightweight balsa and is complimented by the one-piece FRP wheel pants. The complicated form has been successfully recreated in this lightweight structure.

Optimal tail wheel height is set to produce an optimal angle of attack to realize smooth take-offs. Also provides shock absorbing function for safer touch downs.

FRP cowl can be separated from the fuselage structure for easy maintenance. Also features the graphics of the 2007 original.

Proudly wears the Kyosho sponsored decal from the 2007 Reno Air Races. These sponsor graphics are also included.

70-class 4-cycle engine produces true air racing speed. Engine mounting style design produces effective heat dissipation.

• Main components are pre-assembled.
• Complete with basic color scheme.
• Balsa main and tail wings are pre-covered in film.
• Includes latest sponsor decals.
• Unique 12% symmetrical wing type produces both high speeds and stability from large angles of attack.

＜ Included ＞

• Engine mount
• Fuel Tank
• Main Gear
• Rudder connected tail gear
• Decals
• Tires
• Linkage Parts

＜ Required for operation ＞

• 4-channel, 5-servo (2 mini servos for ailerons) R/C system
• 4C52-70, 2C46-50 Engine
• D11 x P6 - D13 x P6 Propeller
• 62mm Spinner
• Fuel, engine starting tools
• Batteries specified for R/C system
• Glue

Technical Data

Length	1,220mm
Width	1,264mm
Weight	2,500g (approx.)
Engine	4 stroke, 52～70 class engine / 2 stroke, 46～50 class engine
Wing Area	33.4dm2
Wing Load	41.5g/dm2 (approx.)
Wing Type	12% Original synmmetrical

This R/C model is not a toy!
Correct assembly and maintenance and choice of appropriate flight location is required for the safe operation of this model. Failure to use responsibly and perform required safety checks can cause fatal accidents. Beginner flyers should never fly solo.