60 CLASS ENGINE POWERED SPORTS TRAINER

CALMATO 60 SPORTS without engine

CARDINAL RED

 

No.11216R　　 ARF Kit

 

* Engine in photograph is sold separately

Big 60-class size realizes calm and easy flight control that is ideal for training .

If you have the space available, a larger trainer can provide the added flight stability and calm control response for a better start to R/C flight. This 60-class low wing trainer has been developed specifically for this purpose. Now you can learn how to manage the higher agility of low wing flight easily. No gluing is needed to produce an accurate finish and fuel supply lines are all pre-set. Ideal for beginners but also recommended as a second airplane for experienced flyers. Super stable in landing and take-off but with nimble stunt performance too! If you have graduated from high-wing airplanes, you're ready for the Calmato 60 Sports !

PP tubes for elevator and rudder linkages are fixed inside the fuselage. Simply pass the rods supplied through and connect to horns and servos.

 

Includes large canopy that results in a smooth and realistic design.

 

The aerodynamic advantages of the 60-class size makes landing and take-off easy to execute. Three wheel landing gear also provides excellent stability on the ground.

 
  • Mild control characteristics make this ideal for a low wing beginner trainer and also as a Sunday stunt flyer.
  • Great for take-off and landing but also stunt practice.
  • No gluing required. Tail wing is bolted on to fuselage.
  • 90% pre-built with balsa fuselage and balsa rib main and tail wings all pre-covered in film.
  • 4-channel, 5-servo specifications use a servo on each aileron.
  • Features built-in PP pipe for throttle linkage to suit 2-stroke 60-class engines.
  • Join the main wing halves by inserting the aluminum plate joining pins and fixing with tape.
  • Open engine room for easy maintenance
  • Easy-build structure allows tail wing to be fixed firmly in place with two bolts.
  • Pre-installed PP tubes allow throttle linkages for 2-stroke 60-class engines to be easily setup. Simply pass the rods supplied through the tubes and connect.
  • Two-piece universal engine mount included. Makes various 60-class engines quick and easy to install.

 

＜ Required for operation ＞

  • R/C System / 4-ch, 5-servo R/C system for airplanes
  • Engine / 2-stroke 60
  • Propeller / D12×P8
  • spinner （57mm）
  • Engine Starting Tools, Fuel

 

 

＜ Included ＞

  • 460cc Fuel Tank
  • tire
  • Moving Nose Gear
  • main gear
  • linkage parts

 

Technical Data

 

Length

1,598mm

Width

1,810mm

Weight

3,400g (approx.)

Wing Area

56.11dm2

Wing Load

60.6g/dm2 (approx.)

Wing Type

NACA2415

This R/C model is not a toy!
Correct assembly and maintenance and choice of appropriate flight location is required for the safe operation of this model. Failure to use responsibly and perform required safety checks can cause fatal accidents. Beginner flyers should never fly solo.